← Roku Interview Insights

Roku·Software Engineer·Onsite - System Design / Architecture·Senior

Senior
Apr 2026

Summary

System design round at Roku for a software engineer role, focused entirely on designing an ad exchange from scratch. Pretty intense scope for a single session, covering everything from auction mechanics to budget pacing at scale.

Questions Asked (6)

Q1

Design a real-time ad exchange system that handles auctions between publishers and advertisers at very high throughput (100K+ QPS) with sub-100ms end-to-end latency.

System DesignTechnical Trade-offs
Author's notes

This was the whole interview basically.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying requirements and scale, then outline a high-level architecture with key components like load balancers, auction servers, and data stores. Dive into critical design decisions for achieving low latency and high throughput, such as in-memory processing, partitioning, and asynchronous communication. Conclude by discussing trade-offs and how you would validate the design.

Pro tip: Emphasize the importance of latency budgets and how you would allocate them across components (e.g., 20ms for bidding, 30ms for auction, etc.). This shows you understand real-time constraints and can make quantitative trade-offs.

1. Clarify Requirements and Scale

Ask questions to understand functional and non-functional requirements: QPS, latency, auction types, data consistency needs, and budget constraints. Confirm the scale (100K+ QPS, sub-100ms) and any additional constraints like geographic distribution.

2. High-Level Architecture

Sketch the main components: load balancers, auction servers (stateless), bidder services, ad servers, and data stores (e.g., Redis for real-time bidding data). Show the flow from ad request to auction to ad serving.

3. Deep Dive into Critical Components

Focus on the auction service: how to handle high throughput with in-memory processing, partitioning by ad slot or user, and using efficient data structures. Discuss how to achieve low latency with asynchronous I/O, caching, and avoiding blocking calls.

4. Address Scalability and Reliability

Explain horizontal scaling of stateless services, sharding of data, and use of message queues for decoupling. Discuss fault tolerance, replication, and graceful degradation (e.g., fallback to default ads).

5. Discuss Trade-offs and Validation

Highlight trade-offs: consistency vs. latency, cost vs. performance, and complexity vs. maintainability. Describe how you would test and monitor the system (load testing, latency percentiles, etc.).

Key Points to Mention

  • Use of in-memory data stores (e.g., Redis) for low-latency bid data and auction state.
  • Partitioning/sharding strategies to distribute load and avoid hotspots.
  • Asynchronous and non-blocking I/O to handle high concurrency.
  • Latency budget allocation and monitoring (e.g., p99 latency).
  • Caching of frequent queries and precomputed results.
  • Graceful degradation and fallback mechanisms to maintain availability.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q2

How would you handle bidder timeouts in the auction protocol without tanking latency for every request?

System DesignTechnical Trade-offs
Author's notes

I said fire-and-forget with a deadline, close the auction at T minus some buffer, and only count bids already received.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the auction protocol's requirements and constraints, such as bidder count, expected latency, and timeout tolerance. Then propose a layered timeout strategy that uses adaptive deadlines and asynchronous bid collection, ensuring that slow bidders don't penalize the common case. Finally, discuss trade-offs between consistency, latency, and complexity, and how you would validate the solution with metrics and load testing.

Pro tip: Emphasize that timeouts should be a last resort, not the primary mechanism—design the system so that the vast majority of requests complete well within the deadline, and use timeouts only to bound worst-case latency. Also, mention that you'd instrument timeout rates and bidder latency distributions to continuously tune thresholds.

1. Clarify requirements and constraints

Ask about the auction protocol (e.g., real-time bidding, ad exchange), expected bidder count, latency SLOs, and whether partial results are acceptable. This ensures your solution aligns with business needs.

2. Design a tiered timeout strategy

Propose different timeout budgets per bidder based on historical performance, and use a global deadline for the auction. Consider adaptive timeouts that adjust based on current load and bidder responsiveness.

3. Implement asynchronous, non-blocking bid collection

Use asynchronous I/O and futures/promises to send bid requests in parallel and collect responses as they arrive. This prevents a single slow bidder from blocking others and allows the auction to proceed once the deadline is reached.

4. Handle timeout gracefully and ensure fairness

Decide on fallback behavior: exclude timed-out bidders, use their last known bid, or degrade to a simpler auction. Ensure the auction remains fair and consistent, and log timeouts for monitoring.

5. Validate and iterate with metrics

Define key metrics (e.g., p99 latency, timeout rate, auction win rate) and set up A/B tests or load tests to measure impact. Continuously tune timeout thresholds based on observed bidder behavior.

Key Points to Mention

  • Adaptive timeout thresholds based on bidder latency percentiles (e.g., p95, p99) rather than fixed timeouts.
  • Asynchronous bid collection with a global deadline to avoid head-of-line blocking.
  • Fallback strategies: excluding slow bidders, using cached bids, or degrading gracefully.
  • Monitoring and alerting on timeout rates and bidder latency distributions to detect anomalies.
  • Trade-offs: stricter timeouts reduce latency but may exclude legitimate bidders; looser timeouts increase latency but improve fairness.
  • Consideration of network jitter and retries, and how to avoid cascading failures.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q3

What data model would you use for campaigns, budgets, and targeting filters, and how do you keep lookups fast enough to fit inside the auction window?

Data ModelingSystem Design
Author's notes

Went with a pretty standard approach: campaigns keyed by advertiser, targeting rules stored as structured attributes, budget as a counter.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the scale and latency requirements of the auction system, then propose a data model that separates campaign metadata, budgets, and targeting filters into normalized tables with appropriate indexes. Explain how you would use caching, in-memory stores, and precomputed targeting sets to achieve sub-millisecond lookups within the auction window.

Pro tip: Emphasize the trade-off between flexibility and performance: use a relational model for campaign management but denormalize and precompute targeting filters into a fast key-value store for auction-time lookups. Mention that you would monitor and adjust based on real-time metrics like p99 latency.

1. Clarify Requirements

Ask about the expected scale (number of campaigns, QPS), latency budget for the auction, and consistency requirements. This shows you understand the problem context before diving into solutions.

2. Propose Core Data Model

Describe a normalized relational schema for campaigns, budgets, and targeting filters, with foreign keys and indexes on frequently queried fields. Explain how this supports CRUD operations and reporting.

3. Optimize for Auction-Time Lookups

Introduce a denormalized, read-optimized store (e.g., Redis, in-memory cache) that holds precomputed targeting sets and budget counters. Explain how you would sync data from the source of truth to this store.

4. Address Consistency and Freshness

Discuss how to handle updates (e.g., budget changes) with minimal latency, using techniques like write-through caching, change data capture, or periodic refreshes. Mention trade-offs between consistency and performance.

5. Ensure Scalability and Monitoring

Explain how the design scales horizontally, and how you would monitor latency and hit rates to ensure the auction window is met. Suggest fallback mechanisms if the cache fails.

Key Points to Mention

  • Normalized schema for campaign management with tables for campaigns, budgets, and targeting filters, using indexes on fields like campaign_id, status, and targeting attributes.
  • Use of an in-memory data store (e.g., Redis) or a specialized targeting service to precompute and serve targeting filters with low latency.
  • Budget tracking with atomic counters or distributed counters to handle high concurrency and avoid overspend.
  • Caching strategies: write-through, read-through, and time-based expiration to balance freshness and performance.
  • Partitioning and sharding strategies to distribute load across multiple nodes for scalability.
  • Monitoring and alerting on p99 latency, cache hit rate, and budget accuracy to ensure SLAs are met.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q4

How do you implement budget pacing and frequency capping at scale without requiring strong consistency on every bid?

System DesignTechnical Trade-offs
Author's notes

Approximate counting with sharded counters, accept some over-delivery rather than block every bid on a distributed lock.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the scale and latency requirements, then propose a distributed architecture that uses local, eventually consistent counters with periodic synchronization to a central store. Emphasize that strict consistency is not required for budget pacing and frequency capping because small over-delivery is acceptable, and focus on trade-offs between accuracy and latency.

Pro tip: Mention that you would use probabilistic data structures like count-min sketch or HyperLogLog for frequency capping to reduce memory and network overhead, and that you would implement a feedback loop to adjust pacing based on real-time performance metrics.

1. Clarify Requirements and Constraints

Ask about scale (QPS, number of campaigns, users), latency requirements, and acceptable error margins for budget and frequency. This sets the stage for choosing the right consistency model.

2. Design a Distributed Counting Architecture

Propose using local counters at each bidder node that are periodically flushed to a central aggregation service (e.g., via Kafka or a distributed cache). Use eventual consistency to avoid synchronous coordination on every bid.

3. Implement Budget Pacing with Local Decisions

Each bidder node maintains a local view of remaining budget and paces bids based on that view. Periodically reconcile with the central budget to adjust pacing rates, allowing for slight overspend that is corrected over time.

4. Implement Frequency Capping with Approximate Counting

Use probabilistic data structures (e.g., count-min sketch) or local caches with TTL to track user frequency. Sync these structures across nodes asynchronously to maintain a global approximate view.

5. Address Trade-offs and Failure Modes

Discuss how to handle node failures, network partitions, and data staleness. Explain how to tune sync intervals to balance accuracy and system load, and how to monitor and alert on budget overspend or frequency violations.

Key Points to Mention

  • Eventual consistency is acceptable for budget pacing and frequency capping because small over-delivery is tolerable and can be corrected later.
  • Use local counters and periodic aggregation to avoid synchronous coordination on every bid, reducing latency and increasing throughput.
  • Probabilistic data structures like count-min sketch or HyperLogLog can efficiently estimate frequency with bounded error.
  • Implement a feedback loop where the central system adjusts pacing rates based on aggregated spend and frequency data.
  • Consider using a distributed cache (e.g., Redis) with atomic increments for near-real-time global counters, but be aware of latency and scalability trade-offs.
  • Design for graceful degradation: if the central system is unavailable, nodes should continue bidding based on local state with conservative pacing.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q5

Walk through your logging pipeline for impression, click, and conversion events and how it feeds into downstream analytics.

System DesignProduct Analytics & Metrics
Author's notes

Async event queue, consumers write to a columnar store for analytics, dedup on event ID for at-least-once delivery.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the scale and requirements (e.g., events per second, latency, data retention) to tailor your design. Then walk through the pipeline stages: collection, ingestion, processing, storage, and serving, emphasizing how each event type (impression, click, conversion) is handled and how the data flows into analytics. Finally, discuss trade-offs and how you would ensure reliability, scalability, and data quality.

Pro tip: Highlight the importance of idempotency and exactly-once processing to avoid double-counting events, especially for conversions where accuracy is critical. Also, mention how you would handle late-arriving data and backfill for analytics.

1. Clarify Requirements and Scope

Ask about scale (events per second, daily volume), latency requirements (real-time vs batch), data retention, and downstream analytics needs. This ensures your design meets the actual use case.

2. Event Collection and Ingestion

Describe how events are generated on clients (e.g., Roku devices) and sent to the backend, including protocols (HTTP, gRPC), batching, and handling offline scenarios. Then explain ingestion via a message queue (e.g., Kafka) for durability and decoupling.

3. Processing and Enrichment

Outline stream processing (e.g., Flink, Spark Streaming) to validate, deduplicate, and enrich events (e.g., add user metadata, sessionization). Discuss handling late data and exactly-once semantics.

4. Storage and Serving

Explain storing raw events in a data lake (e.g., S3) and processed data in a warehouse (e.g., Redshift, BigQuery) or OLAP store for analytics. Mention partitioning, indexing, and retention policies.

5. Downstream Analytics and Metrics

Describe how the data feeds into dashboards, reports, and machine learning models. Cover metrics like impressions, clicks, conversions, and how they are computed (e.g., funnel analysis, attribution).

Key Points to Mention

  • Event schema design: include common fields (event_id, user_id, timestamp, event_type) and type-specific fields (e.g., ad_id for impressions, conversion_value for conversions).
  • Scalability and partitioning: use Kafka partitions and parallel processing to handle high throughput; partition data by date/time for efficient querying.
  • Exactly-once processing: use idempotent writes and transactional guarantees to avoid duplicates, especially for conversions.
  • Late-arriving data: use watermarks and windowing in stream processing, and support backfill in batch processing.
  • Data quality and monitoring: implement validation, alerting on anomalies, and reconciliation between raw and processed counts.
  • Analytics use cases: funnel analysis, attribution modeling, A/B testing, and real-time dashboards.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q6

What are the key trade-offs between auction depth and latency, and between consistency and availability for budget counters?

Technical Trade-offsSystem Design
Author's notes

The classic CAP framing applied to ad tech.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the context: auction depth refers to the number of bidder levels considered in real-time ad auctions, while latency is the time to respond; consistency vs availability relates to budget counters in distributed systems. Then discuss the trade-offs: deeper auctions improve revenue but increase latency, and strong consistency prevents overspend but reduces availability. Conclude with practical strategies like tiered auctions, eventual consistency with reconciliation, and CAP theorem considerations.

Pro tip: Emphasize that in ad tech, latency directly impacts user experience and revenue, so often availability is prioritized with eventual consistency, but budget overspend must be bounded. Mention specific techniques like token buckets or probabilistic throttling to show depth.

1. Define the concepts

Briefly define auction depth, latency, consistency, and availability in the context of ad serving and budget counters. This sets a common understanding.

2. Explain auction depth vs latency trade-off

Discuss how considering more bids (depth) improves auction competitiveness and revenue but increases processing time (latency). Mention the need to balance real-time constraints (e.g., <100ms) with revenue goals.

3. Explain consistency vs availability for budget counters

Describe how strong consistency ensures accurate budget tracking but can cause unavailability during partitions or high load, while eventual consistency improves availability but risks overspend. Reference CAP theorem.

4. Propose practical solutions

Suggest approaches like tiered auctions (shallow first, deep if time permits), distributed counters with eventual consistency and reconciliation, or using CRDTs. Highlight trade-off management.

5. Summarize and tie to business impact

Conclude by linking these trade-offs to business metrics: revenue, user experience, and advertiser trust. Show awareness of Roku's streaming ad business.

Key Points to Mention

  • CAP theorem and its implications for distributed budget counters
  • Latency budgets in real-time bidding (e.g., 100ms timeout)
  • Techniques like token buckets, probabilistic throttling, or sharded counters
  • Eventual consistency with reconciliation to bound overspend
  • Tiered or progressive auction depth to balance revenue and latency
  • Impact on user experience and advertiser satisfaction

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.