← Microsoft Interview InsightsSoftware Engineer

Microsoft·Software Engineer·Onsite - System Design / Architecture·Senior

SeniorPrefer not to say
Jun 2026

Summary

Microsoft SWE system design round focused entirely on rate limiting. The question started simple enough but kept expanding into distributed systems territory, which I was not fully prepared for.

Questions Asked (5)

Q1

Implement a rate limiter with an allow(client_id, timestamp) method that returns true or false based on a configured policy like N requests per W seconds per client.

Algorithms & Data StructuresSystem Design
Author's notes

I jumped straight to sliding window log with a deque of timestamps because it felt clean and exact.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the requirements and assumptions, such as whether the policy is fixed or sliding window, and whether timestamps are monotonic. Then, propose a data structure like a hash map from client_id to a queue or deque of timestamps, and explain how to enforce the limit. Finally, discuss trade-offs, edge cases, and potential optimizations for concurrency and memory.

Pro tip: Mention that you would use a sliding window log with a deque for O(1) amortized operations, but also note that a fixed window counter is simpler and may be acceptable if the interviewer prioritizes simplicity. This shows you understand both correctness and practical trade-offs.

1. Clarify requirements and assumptions

Ask about the exact policy (e.g., sliding window vs fixed window), whether timestamps are strictly increasing, and if the system is single-threaded or concurrent. Confirm the expected time and space complexity.

2. Choose a data structure

Propose a hash map mapping client_id to a queue (or deque) of timestamps. Explain that the queue stores timestamps of recent requests within the window, and that you can evict old entries efficiently.

3. Design the allow method

Describe the algorithm: retrieve or create the queue for the client, remove timestamps older than timestamp - W, check if the queue size is less than N, and if so, add the current timestamp and return true; otherwise return false.

4. Analyze complexity and edge cases

State that each allow call takes O(1) amortized time (each timestamp is added and removed once) and O(N) space per client. Discuss edge cases like empty queue, exactly N requests, and out-of-order timestamps.

5. Discuss optimizations and concurrency

Mention potential improvements: using a fixed window counter for lower memory, or a sliding window counter for smoother limiting. For concurrency, suggest locking per client or using atomic operations.

Key Points to Mention

  • Sliding window log algorithm with a deque for O(1) amortized operations
  • Hash map from client_id to queue for efficient per-client tracking
  • Time and space complexity: O(1) per request, O(N) per client
  • Handling of out-of-order timestamps and monotonicity assumptions
  • Trade-offs between sliding window log, fixed window, and sliding window counter
  • Concurrency considerations: thread safety, locking, or atomic operations

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q2

Your rate limiter needs to handle 100K requests per second. Which per-client data structure do you pick and why, deque of timestamps, fixed counters, or token bucket state?

Technical Trade-offsSystem Design
Author's notes

Switched my answer to token bucket here after admitting the deque was too heavy.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Compare the three data structures based on memory footprint, CPU cost, and accuracy at 100K RPS, then justify token bucket as the optimal choice for high-scale rate limiting. Acknowledge trade-offs and mention practical implementation details like atomic operations and distributed considerations.

Pro tip: Emphasize that at 100K RPS, per-client state must be O(1) in both time and space; token bucket achieves this with just two numbers, while deque of timestamps is O(N) and impractical. Also, mention that token bucket allows controlled bursts, which is often a business requirement.

1. Clarify requirements and constraints

Restate the problem: 100K requests per second, per-client rate limiting, need for low latency and memory efficiency. Ask if burst handling is required and if the system is distributed.

2. Evaluate deque of timestamps

Explain that storing timestamps for each request is memory-intensive (O(N) per client) and requires O(N) operations to evict old entries, making it unsuitable for high throughput.

3. Evaluate fixed counters

Discuss fixed window counters: O(1) memory and time, but suffer from boundary bursts (e.g., 2x rate at window edges) and lack smoothness, which may be unacceptable for strict rate limiting.

4. Evaluate token bucket state

Describe token bucket: stores tokens and last refill timestamp (O(1) memory), allows bursts up to bucket size, and refill is O(1) per request. It provides smooth rate limiting and is widely used in production systems.

5. Conclude and discuss implementation

Choose token bucket as the best trade-off for 100K RPS, and mention practical aspects: atomic operations (e.g., Redis Lua scripts), distributed coordination, and handling clock skew.

Key Points to Mention

  • Memory and time complexity: deque O(N) vs. fixed counter O(1) vs. token bucket O(1).
  • Accuracy and burst handling: fixed counters allow bursts at window boundaries; token bucket smooths traffic and allows controlled bursts.
  • Scalability: token bucket requires only two integers per client, making it feasible for millions of clients at 100K RPS.
  • Implementation: use atomic operations or Redis for distributed rate limiting; consider lazy refill to avoid timers.
  • Trade-offs: token bucket may allow short bursts, but that's often desirable; fixed counters are simpler but less accurate.
  • Real-world usage: token bucket is used by AWS, Stripe, and many API gateways for rate limiting.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q3

How would you scale the in-process rate limiter for high throughput? Think about locking strategies and per-key sharding.

System DesignTechnical Trade-offs
Author's notes

Talked about sharding the key space across goroutines or threads so you avoid a single global lock.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by acknowledging the limitations of a single in-process rate limiter under high throughput, then propose a sharded design where each shard handles a subset of keys with its own lock, minimizing contention. Discuss trade-offs between lock granularity, shard count, and memory overhead, and mention how to handle hot keys and rebalancing.

Pro tip: Emphasize that the goal is to reduce lock contention, not eliminate locks entirely; using per-key locks or lock-free structures like atomic counters can be effective but require careful consideration of correctness and performance.

1. Identify bottlenecks

Explain that a single global lock or a single counter becomes a contention point under high throughput, leading to increased latency and reduced throughput.

2. Introduce sharding

Propose partitioning the key space into multiple shards (e.g., by hashing the key modulo N), each with its own lock and counter, so operations on different keys can proceed in parallel.

3. Choose locking strategy

Discuss options: per-shard locks (e.g., ReentrantLock or synchronized), striped locks, or lock-free atomic operations (e.g., AtomicLong) for each shard, balancing simplicity and performance.

4. Handle hot keys and rebalancing

Acknowledge that sharding can still suffer if a single key is extremely hot; suggest techniques like local caching, adaptive sharding, or using a distributed rate limiter for such cases.

5. Evaluate trade-offs

Summarize trade-offs: more shards reduce contention but increase memory and complexity; lock-free approaches avoid blocking but may have ABA issues or require careful memory management.

Key Points to Mention

  • Lock contention is the primary bottleneck in a single in-process rate limiter.
  • Sharding by key (e.g., hash(key) % numShards) distributes load and reduces contention.
  • Per-shard locks or atomic counters (e.g., AtomicLong) can be used; consider lock striping.
  • Hot keys can still cause contention; consider local caching or adaptive sharding.
  • Trade-offs: shard count vs. memory overhead, lock granularity vs. complexity.
  • For extreme scale, consider a distributed rate limiter (e.g., Redis) but discuss latency trade-offs.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q4

If the rate limiter is distributed across multiple nodes, how do you coordinate state? Walk through the options and their consistency versus accuracy tradeoffs.

System DesignTechnical Trade-offs
Author's notes

This is where the interview got real.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the requirements: what consistency level is needed, what's the acceptable error margin, and what's the scale? Then walk through the main coordination strategies—centralized store, gossip, and CRDTs—and for each, discuss the tradeoff between consistency (accuracy) and availability/latency. Conclude by recommending a pragmatic hybrid approach, such as using Redis with local fallbacks, and explain how you'd handle edge cases like node failures.

Pro tip: Emphasize that perfect global accuracy is often unnecessary; a small over- or under-count is usually acceptable. Propose a design that favors availability and low latency, with mechanisms to bound the error (e.g., token bucket with periodic sync), and mention how you'd monitor and adjust.

1. Clarify Requirements

Ask about the consistency needs: is strict global accuracy required, or is eventual consistency acceptable? Determine the scale (requests per second, number of nodes) and latency constraints.

2. Centralized Store

Discuss using a centralized data store like Redis or a database. This provides strong consistency but introduces a single point of failure and potential latency; consider replication and failover.

3. Distributed Coordination

Explore distributed algorithms like gossip protocols or consensus (Raft, Paxos). These offer high availability but eventual consistency, and may have higher latency and complexity.

4. Local with Synchronization

Propose a hybrid: each node maintains a local rate limit and periodically syncs with a central store or peers. This reduces latency but can allow temporary over-limit; bound the error by sync frequency.

5. Evaluate Tradeoffs and Recommend

Compare options on consistency, availability, latency, and complexity. Recommend a solution based on requirements, e.g., Redis with local fallback for high availability, and discuss failure handling.

Key Points to Mention

  • CAP theorem and the tradeoff between consistency and availability
  • Token bucket or sliding window algorithms and how they adapt to distributed settings
  • Redis or Memcached as centralized stores with replication and clustering
  • Gossip protocols and CRDTs for eventually consistent counters
  • Local rate limiting with periodic synchronization to reduce latency
  • Handling node failures and network partitions (e.g., fallback to local limits)

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q5

What happens when the backing store like Redis becomes unreachable? Do you fail open or fail closed, and what drives that decision?

System DesignTechnical Trade-offs
Author's notes

Said it depends on the product context, which is the right answer but felt a bit safe.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying that the answer depends on the specific use case and business requirements, then explain the trade-offs between failing open and failing closed. Provide a concrete example of how you would decide, considering factors like security, availability, and user experience.

Pro tip: Demonstrate maturity by mentioning that you would instrument the system to detect Redis unavailability and have a fallback strategy, such as a local cache or a degraded mode, rather than a binary fail-open/fail-closed decision.

1. Clarify the context

Ask or state the specific use case: is Redis used for caching, session storage, rate limiting, or something else? The impact of Redis being unreachable varies greatly.

2. Define fail open vs. fail closed

Briefly define what each means in this context: fail open allows operations to proceed without Redis (e.g., bypass cache), while fail closed blocks operations (e.g., deny access).

3. Analyze trade-offs

Discuss the trade-offs: fail open prioritizes availability but may risk stale data or security issues; fail closed prioritizes consistency and security but may cause outages.

4. Consider business and technical factors

List factors that drive the decision: data criticality, user experience, security requirements, compliance, and system resilience patterns (e.g., circuit breakers, fallbacks).

5. Propose a strategy

Suggest a nuanced approach: e.g., fail open for non-critical caching with a local fallback, fail closed for authentication; or implement graceful degradation with monitoring and alerts.

Key Points to Mention

  • Use case dependency: caching vs. session store vs. rate limiting
  • Trade-offs: availability vs. consistency, security vs. user experience
  • Fallback mechanisms: local cache, in-memory store, degraded mode
  • Circuit breaker pattern to prevent cascading failures
  • Monitoring and alerting for Redis unavailability
  • Business impact: revenue loss, user trust, compliance violations

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.