← ASML Interview Insights

ASML·Software Engineer·Technical Phone Screen·Senior

Senior
Jun 2026

Summary

Technical screen for a Data Engineer role at ASML, pretty deep on Spark internals. The whole conversation was basically one long optimization discussion and they wanted you to back everything up with a real example you'd actually tuned.

Questions Asked (8)

Q1

Walk me through how you would optimize an Apache Spark job end to end, and describe a real job you tuned along with the metrics that improved.

System DesignTechnical Trade-offs
Author's notes

This is the kind of question that sounds manageable until you're halfway through and realize you've been talking for five minutes and haven't touched caching or AQE yet.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Structure your answer around a systematic optimization methodology covering data, partitioning, memory, and execution, then anchor it with a concrete example from your experience. Quantify the before-and-after metrics to demonstrate impact and tie your optimizations to business outcomes.

Pro tip: Always mention that you validate optimizations with Spark UI metrics and A/B tests, and highlight trade-offs like increased shuffle vs. reduced memory pressure. This shows you understand that optimization is about balancing resources, not just applying every trick.

1. Profile and Identify Bottlenecks

Start by analyzing the Spark UI and logs to find stages with high shuffle, skew, or GC time. Use metrics like task duration, input size, and spill to pinpoint the main inefficiencies.

2. Optimize Data Layout and Partitioning

Address data skew and partition sizing by repartitioning, using salting, or bucketing. Ensure file formats like Parquet with predicate pushdown and appropriate compression.

3. Tune Memory and Shuffle Configurations

Adjust executor memory, cores, and parallelism; tune shuffle partitions and memory fractions. Consider caching intermediate datasets if reused, and broadcast small tables.

4. Refine Code and Execution Plan

Replace inefficient transformations (e.g., groupByKey with reduceByKey), avoid UDFs when possible, and leverage Catalyst optimizations. Check the physical plan for unnecessary shuffles.

5. Measure and Iterate

After each change, re-run and compare metrics like runtime, resource usage, and cost. Validate improvements with statistical significance and document trade-offs.

Key Points to Mention

  • Use of Spark UI and metrics (e.g., shuffle read/write, GC time, task skew) to diagnose issues
  • Partitioning strategies: repartition, coalesce, salting for skew, and adaptive query execution
  • Memory management: executor memory, off-heap, serialization (Kryo), and caching levels
  • Shuffle optimization: reduceByKey vs groupByKey, shuffle partitions, and broadcast joins
  • Code-level optimizations: avoiding UDFs, using built-in functions, and DataFrame vs RDD
  • Quantifiable results: e.g., reduced runtime by 40%, shuffle data by 60%, or cost savings

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q2

How do you detect and handle data skew in Spark, and what are the tradeoffs between salting, broadcast joins, and repartitioning?

Technical Trade-offsSystem Design
Author's notes

Salting always trips people up on the tradeoffs part.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by explaining how to detect skew through Spark UI metrics and key distribution analysis, then describe handling techniques like salting, broadcast joins, and repartitioning. Finally, compare their tradeoffs in terms of performance, memory, and complexity, and suggest when to use each.

Pro tip: Mention that salting adds overhead and may not be suitable for all joins, and that broadcast joins can cause OOM if the broadcasted table is too large. Always validate with metrics before and after applying a technique.

1. Detect Skew

Use Spark UI to identify straggling tasks, check stage metrics for uneven task durations, and analyze key distribution with df.groupBy(key).count().

2. Understand Causes

Recognize that skew often arises from joins on skewed keys, groupBy on high-frequency keys, or repartitioning by a skewed column.

3. Apply Mitigation Techniques

Choose appropriate techniques: salting for joins/aggregations, broadcast joins for small tables, and repartitioning to redistribute data.

4. Evaluate Tradeoffs

Compare techniques: salting increases data size and complexity but handles large skewed joins; broadcast joins avoid shuffles but risk OOM; repartitioning is simple but may not fully resolve skew.

5. Validate and Iterate

Measure performance after applying techniques, monitor for new bottlenecks, and adjust strategy as needed.

Key Points to Mention

  • Spark UI metrics: task duration, shuffle read/write, and stragglers
  • Salting: adding random prefix to keys, then stripping after aggregation
  • Broadcast joins: using broadcast() hint for small tables, avoiding shuffles
  • Repartitioning: using repartition() or distribute by to balance data
  • Tradeoffs: salting increases data volume and complexity; broadcast joins risk OOM; repartitioning causes full shuffle
  • Adaptive Query Execution (AQE) in Spark 3.x can automatically handle skew joins

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q3

What strategies do you use to minimize shuffle in Spark jobs, and how do you decide between a broadcast join and a sort-merge join?

Technical Trade-offsSystem Design
Author's notes

Felt solid here.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by explaining the general principle that shuffle is expensive due to disk I/O, network I/O, and serialization, then list concrete strategies to minimize it. For the join decision, focus on the trade-offs between broadcast and sort-merge joins, emphasizing data size, memory constraints, and performance implications. Use a structured comparison to show your decision-making process.

Pro tip: Mention that you monitor Spark UI metrics like shuffle read/write and task skew to validate your optimizations, and that you consider data distribution and cluster resources before choosing a join strategy.

1. Define shuffle and its impact

Briefly explain what shuffle is in Spark and why it's costly (network, disk, serialization). This sets the context for your strategies.

2. List shuffle minimization strategies

Cover techniques like using broadcast variables, avoiding groupByKey in favor of reduceByKey, using map-side aggregation, partitioning, and bucketing. Explain how each reduces data movement.

3. Explain broadcast join

Describe when to use broadcast join: when one dataset is small enough to fit in memory (e.g., <10MB by default, configurable). Mention that it avoids shuffle by replicating the small dataset to all executors.

4. Explain sort-merge join

Describe sort-merge join: used when both datasets are large. It involves shuffling and sorting both datasets on the join key, then merging. Mention that it's scalable but shuffle-heavy.

5. Decide between them

Outline decision criteria: size of datasets, memory availability, and whether one side can fit in memory. Also consider using hints or letting Spark's optimizer decide, but be ready to override.

Key Points to Mention

  • Shuffle is triggered by operations like groupByKey, reduceByKey, join, and repartition; minimize by using reduceByKey over groupByKey, and map-side combine.
  • Broadcast join avoids shuffle by sending small dataset to all executors; use when one side is small (e.g., <10MB) and fits in memory.
  • Sort-merge join shuffles and sorts both datasets; suitable for large datasets but can be optimized with partitioning and bucketing.
  • Spark's adaptive query execution (AQE) can automatically convert sort-merge join to broadcast join if one side is small at runtime.
  • Use Spark UI to monitor shuffle metrics and identify skew; consider salting keys to distribute data evenly.
  • Partitioning and bucketing tables can reduce shuffle in subsequent joins by pre-organizing data.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q4

How do you decide when and what to cache or persist in Spark, and how do you choose the right storage level?

Technical Trade-offs
Author's notes

Shorter exchange than I expected.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by framing caching and persistence as performance optimization techniques that trade memory/disk for reduced recomputation. Explain a decision process based on whether a DataFrame/RDD is reused multiple times, the cost of recomputation, and available cluster resources. Then discuss storage level selection by considering data size, serialization, fault tolerance, and memory pressure.

Pro tip: Emphasize that caching is not a silver bullet—over-caching can cause memory spills, GC overhead, and eviction, so always measure with Spark UI and unpersist when done. Mention that for ASML's data-intensive pipelines, iterative algorithms and interactive queries benefit most, but one-off jobs rarely need caching.

1. Assess reuse and recomputation cost

Determine if the dataset will be used multiple times in the same application (e.g., iterative ML, interactive queries) and how expensive it is to recompute from source. If reuse is high and recomputation is costly, caching is beneficial.

2. Evaluate data size and cluster resources

Check the size of the dataset relative to available memory and disk. If the data fits comfortably in memory across executors, consider memory-based storage; otherwise, use disk or off-heap options.

3. Choose between cache() and persist()

Use cache() for default MEMORY_AND_DISK storage when you want a quick, general-purpose option. Use persist() when you need explicit control over the storage level for performance or resource reasons.

4. Select the appropriate storage level

Consider trade-offs: MEMORY_ONLY is fast but may cause recomputation if evicted; MEMORY_AND_DISK spills to disk; DISK_ONLY is slower but more memory-efficient; serialized options reduce memory footprint at CPU cost; replication increases fault tolerance but uses more space.

5. Monitor and unpersist

Use Spark UI to monitor storage memory, spills, and GC. Unpersist datasets when no longer needed to free resources for other stages.

Key Points to Mention

  • Reuse pattern: caching is most effective for datasets accessed multiple times, especially in iterative algorithms or interactive sessions.
  • Storage levels: MEMORY_ONLY, MEMORY_AND_DISK, DISK_ONLY, MEMORY_ONLY_SER, MEMORY_AND_DISK_SER, and replicated variants, with trade-offs between speed, memory usage, and fault tolerance.
  • Serialization: using serialized storage (e.g., MEMORY_ONLY_SER) reduces memory footprint but adds CPU overhead for deserialization.
  • Eviction and recomputation: memory-only levels may evict partitions, leading to recomputation; memory-and-disk avoids recomputation by spilling to disk.
  • Resource management: over-caching can lead to memory pressure, GC overhead, and out-of-memory errors; always unpersist when done.
  • Monitoring: use Spark UI to track storage memory, disk spills, and task durations to validate caching decisions.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q5

How do you tune executor count, executor memory, cores per executor, and spark.sql.shuffle.partitions for a large Spark job?

System DesignTechnical Trade-offs
Author's notes

This is where I got a little shaky on config names as mentioned.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by explaining that tuning is an iterative, workload-driven process, not a one-size-fits-all formula. Describe how you would profile the job to identify bottlenecks (CPU, memory, shuffle, I/O) and then adjust each parameter based on cluster resources and data characteristics, validating with metrics.

Pro tip: Always leave headroom: don't allocate 100% of cluster resources to a single job, and remember that more executors isn't always better—oversubscribing cores can lead to excessive context switching and GC overhead.

1. Profile and identify bottlenecks

Use Spark UI, logs, and metrics to determine if the job is CPU-bound, memory-bound, shuffle-heavy, or I/O-bound. Look for skew, spills, GC time, and task durations.

2. Set executor count and cores per executor

Base executor count on available cluster resources and desired concurrency. Typically use 5 cores per executor to balance HDFS throughput and avoid excessive GC; adjust based on workload.

3. Tune executor memory

Allocate memory based on data size and operations. Account for overhead (spark.executor.memoryOverhead) and leave room for caching. Monitor GC and spills to adjust.

4. Optimize shuffle partitions

Set spark.sql.shuffle.partitions to a multiple of total executor cores (e.g., 2-3x) to balance parallelism and overhead. For large shuffles, consider 200-2000 partitions; use adaptive query execution if available.

5. Iterate and validate

Run the job with new settings, measure performance, and repeat. Use A/B testing or incremental changes to isolate impact. Document final configuration for reproducibility.

Key Points to Mention

  • Dynamic allocation vs. static allocation of executors
  • Memory overhead and off-heap memory considerations
  • Data skew and salting techniques for shuffle optimization
  • Adaptive Query Execution (AQE) in Spark 3.x for automatic tuning
  • Cluster manager constraints (YARN, Kubernetes) and resource queues
  • Trade-offs between parallelism, GC overhead, and I/O

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q6

Can you explain how Catalyst optimizer and Adaptive Query Execution work in Spark, and how they affect your tuning decisions?

System DesignTechnical Trade-offs
Author's notes

AQE is one of those things where knowing it exists is not the same as being able to explain the runtime coalescing and skew join handling it does.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by defining Catalyst as Spark's rule-based optimizer that transforms logical plans into efficient physical plans, and AQE as a runtime re-optimization framework that adjusts plans based on actual data statistics. Then explain how each influences tuning decisions, such as join strategy selection, partition sizing, and skew handling, and tie it back to real-world scenarios like ETL pipelines or interactive queries.

Pro tip: Emphasize that AQE complements Catalyst by fixing inaccuracies in compile-time statistics, and mention that tuning often involves knowing when to disable AQE for predictable workloads. This shows you understand trade-offs beyond just enabling features.

1. Define Catalyst Optimizer

Explain that Catalyst is a rule-based optimizer that applies logical and physical plan transformations, using cost-based optimization for join ordering and broadcast hints. Mention its extensibility via custom rules.

2. Define Adaptive Query Execution (AQE)

Describe AQE as a runtime optimizer that re-optimizes query plans based on runtime statistics, enabling dynamic coalescing of partitions, switching join strategies, and handling skew.

3. Explain How They Affect Tuning Decisions

Discuss how Catalyst's compile-time decisions (e.g., broadcast join thresholds) and AQE's runtime adjustments (e.g., partition coalescing) influence configuration parameters like spark.sql.adaptive.enabled, spark.sql.autoBroadcastJoinThreshold, and shuffle partitions.

4. Provide a Concrete Example

Give a scenario where AQE improves performance, such as a join with skewed data where AQE splits skewed partitions, or where Catalyst's broadcast join avoids a shuffle.

5. Summarize Tuning Implications

Conclude with how you balance these optimizers: use Catalyst for static optimizations and AQE for dynamic adjustments, and know when to override defaults based on workload characteristics.

Key Points to Mention

  • Catalyst's rule-based and cost-based optimization phases (analysis, logical optimization, physical planning, code generation).
  • AQE's key features: dynamically coalescing shuffle partitions, switching join strategies, and handling skew.
  • Relevant configuration parameters: spark.sql.adaptive.enabled, spark.sql.adaptive.coalescePartitions.enabled, spark.sql.adaptive.skewJoin.enabled, spark.sql.autoBroadcastJoinThreshold.
  • Trade-offs: AQE adds runtime overhead but improves performance for unpredictable data; Catalyst relies on accurate statistics.
  • Impact on tuning: setting partition sizes, join hints, and broadcast thresholds based on data characteristics.
  • Real-world example: using AQE to optimize a skewed join in a large-scale ETL job.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q7

How do you read data efficiently in Spark, particularly using Parquet with predicate pushdown and column pruning?

Technical Trade-offsSystem Design
Author's notes

Easy one to close on.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by explaining how Spark reads Parquet files, emphasizing that predicate pushdown and column pruning are key optimizations that reduce I/O. Then, describe how these work in practice, including partitioning and file layout, and discuss trade-offs like small file overhead. Finally, tie it to a real-world example, such as processing large datasets at ASML, to show practical understanding.

Pro tip: Mention that while Parquet supports predicate pushdown, it only works if the filter is on a column that is stored in the file's metadata (e.g., not a derived column) and if the data is properly partitioned. Also, highlight that column pruning is automatic when using DataFrame/Dataset API but not with RDDs.

1. Explain Parquet's columnar format

Describe how Parquet stores data column-wise, enabling efficient compression and encoding, and how this layout allows Spark to read only necessary columns.

2. Define predicate pushdown

Explain that predicate pushdown filters data at the storage level using Parquet metadata (min/max statistics), so Spark reads fewer rows, reducing I/O and memory usage.

3. Define column pruning

Explain that column pruning means Spark reads only the columns needed for the query, skipping irrelevant columns, which is automatic with the DataFrame API.

4. Discuss partitioning and file layout

Mention that partitioning data by filter columns (e.g., date) further improves pushdown, but beware of small files causing overhead; consider compaction or bucketing.

5. Highlight trade-offs and best practices

Discuss trade-offs like the cost of wide schemas, the importance of statistics, and when pushdown may not apply (e.g., complex expressions). Recommend using DataFrame API and avoiding UDFs in filters.

Key Points to Mention

  • Parquet's columnar storage and metadata (row group statistics)
  • Predicate pushdown: filtering at source using min/max stats
  • Column pruning: reading only required columns
  • Partitioning and bucketing to improve pushdown
  • Trade-offs: small files, wide schemas, complex filters
  • Use of DataFrame/Dataset API over RDDs for automatic optimization

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q8

Why should you avoid wide transformations and UDFs in Spark when possible, and what are the alternatives?

Technical Trade-offsAlgorithms & Data Structures
Author's notes

Wide transformations trigger shuffles, UDFs are black boxes to Catalyst so it can't optimize through them and they serialize data out of the JVM in Python's case.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by explaining that wide transformations and UDFs are costly because they force data shuffling and break Catalyst optimizer benefits, leading to network I/O and serialization overhead. Then discuss alternatives like using built-in functions, broadcast joins, and partitioning strategies to minimize shuffles. Finally, tie it back to performance and scalability in distributed systems.

Pro tip: Mention that while UDFs are sometimes necessary, you can often rewrite them using Spark SQL functions or pandas UDFs (vectorized) to retain some optimization. Also, highlight that understanding the trade-offs is key, and sometimes a wide transformation is unavoidable but can be optimized.

1. Define wide transformations and UDFs

Briefly define wide transformations (e.g., groupByKey, join, repartition) as operations that require data shuffling across partitions, and UDFs as user-defined functions that operate row-by-row and are opaque to Spark's optimizer.

2. Explain the costs

Discuss the performance implications: wide transformations cause network I/O, disk I/O, and serialization overhead; UDFs prevent Catalyst optimizations and can be slower due to row-by-row processing and Python/JVM serialization.

3. Provide alternatives

Suggest alternatives: use built-in Spark SQL functions instead of UDFs, use reduceByKey over groupByKey, use broadcast joins for small tables, and use partitioning/bucketing to colocate data and avoid shuffles.

4. Discuss when they are necessary

Acknowledge that sometimes wide transformations or UDFs are unavoidable, but you can mitigate costs by using vectorized UDFs (pandas UDFs), optimizing shuffle partitions, or using adaptive query execution.

5. Conclude with best practices

Summarize that the goal is to minimize shuffles and leverage Spark's optimizer; always prefer built-in functions and design for data locality.

Key Points to Mention

  • Wide transformations cause shuffles, leading to network and disk I/O.
  • UDFs are black boxes to Catalyst, preventing optimizations like predicate pushdown and column pruning.
  • Built-in functions (e.g., Spark SQL functions) are optimized and should be preferred.
  • reduceByKey performs map-side combine, reducing data shuffled compared to groupByKey.
  • Broadcast joins avoid shuffles when joining a large table with a small one.
  • Partitioning and bucketing can colocate data and reduce shuffle overhead.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.