← InterSystems Interview Insights

InterSystems·Software Engineer·Technical Phone Screen·Intermediate

Intermediate
May 2026

Summary

Got a classic brain teaser at InterSystems for a software engineering role. Nothing too exotic, but the 45-minute version of the rope puzzle is one of those questions where you either see it or you don't.

Questions Asked (1)

Q1

You have two ropes that each burn completely in 60 minutes, but they burn unevenly. Using only the ropes and a lighter, how would you measure exactly 45 minutes?

Algorithms & Data StructuresAdaptability & Ambiguity
Author's notes

The 60-minute part is a giveaway, just light one rope and wait.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

First, clarify that the ropes burn unevenly, so you cannot rely on length or burn rate. Then, explain that lighting both ends of one rope and one end of the other simultaneously will yield a 30-minute timer and a 60-minute timer, respectively. When the first rope burns out at 30 minutes, light the other end of the second rope to make it burn in 15 more minutes, totaling 45 minutes.

Pro tip: Walk through the timing step-by-step and explicitly state what each rope represents at each moment; this shows structured thinking and avoids confusion. Also, mention that this puzzle tests your ability to reason under ambiguity, a key skill for software engineers.

1. Clarify the problem

Restate the constraints: each rope burns in 60 minutes but unevenly, so you cannot measure by length or assume a constant burn rate. You can only use the ropes and a lighter.

2. Identify key insight

Recognize that lighting a rope at both ends makes it burn in half the time (30 minutes), regardless of uneven burning. This is because the two flames together consume the rope twice as fast.

3. Set up initial burns

Light both ends of Rope A and one end of Rope B at the same time. Rope A will burn out in exactly 30 minutes, marking the halfway point.

4. Trigger second phase

When Rope A burns out (at 30 minutes), immediately light the other end of Rope B. Rope B has already been burning from one end for 30 minutes, so it has 30 minutes of burn time remaining. Lighting the other end will make it burn out in 15 more minutes.

5. Confirm total time

When Rope B burns out completely, the total elapsed time is 30 + 15 = 45 minutes. This is the desired measurement.

Key Points to Mention

  • Uneven burning means you cannot use length or assume constant rate; only total burn time is known.
  • Lighting a rope at both ends halves its burn time to 30 minutes.
  • Simultaneously starting both ropes allows synchronization of timers.
  • The first rope acts as a 30-minute timer to trigger the second phase.
  • Lighting the second end of the second rope when the first rope finishes creates a 15-minute timer.
  • The solution demonstrates logical reasoning and adaptability to ambiguous problems.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.