← Cohere Interview Insights

Cohere·Machine Learning Engineer·Technical Phone Screen·Senior

SeniorPrefer not to say
Apr 2026Remote

Summary

Oral technical screen for an MLE role at Cohere covering basically the full ML stack. Four distinct topic areas, each with follow-up questions that go pretty deep. The RL/post-training section gets the most weight, so don't treat it as a quick review.

Questions Asked (7)

Q1

Walk me through how you approach data curation and mixing decisions when pre-training a large language model.

Technical Trade-offsSystem Design
Author's notes

This is where I felt least prepared.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Frame your answer around a systematic pipeline: data sourcing, quality filtering, deduplication, domain mixing, and iterative evaluation. Emphasize trade-offs between data quantity, quality, and diversity, and how you use small-scale experiments to inform large-scale training decisions.

Pro tip: Mention that you treat data mixing as a hyperparameter search problem, using proxy models and ablation studies to find optimal domain weights before committing to expensive full-scale runs. Also highlight the importance of monitoring for distribution shifts and feedback loops in web-scraped data.

1. Define objectives and constraints

Clarify the model's intended use cases, target domains, and compute budget to set data requirements. Establish evaluation metrics that reflect downstream performance and data quality.

2. Source and filter data

Collect data from diverse sources (web, books, code, etc.) and apply quality filters (e.g., heuristic rules, classifier-based filtering, toxicity removal). Balance source diversity with quality thresholds.

3. Deduplicate and clean

Remove near-duplicates at document and sub-document levels using MinHash, SimHash, or exact matching. Address boilerplate, formatting artifacts, and PII to improve data hygiene.

4. Determine mixing weights

Experiment with domain proportions using small proxy models and ablation studies. Adjust weights based on target task performance, while avoiding overfitting to any single domain.

5. Iterate with evaluation

Continuously evaluate model checkpoints on held-out benchmarks and data quality metrics. Use findings to refine filtering, deduplication, and mixing strategies in subsequent training runs.

Key Points to Mention

  • Quality filtering techniques: heuristic rules, classifier-based filtering, perplexity thresholds
  • Deduplication methods: MinHash, SimHash, exact match, and their trade-offs
  • Domain mixing strategies: temperature-based sampling, proportional mixing, and dynamic weighting
  • Use of proxy models and ablation studies to optimize data mixtures efficiently
  • Handling of data contamination and benchmark leakage
  • Ethical and legal considerations: licensing, PII removal, and bias mitigation

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q2

How does tokenization choice affect model training and downstream performance?

Technical Trade-offs
Author's notes

Felt okay on this one.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by defining tokenization and its role in converting text to model inputs, then discuss trade-offs like vocabulary size, sequence length, and subword granularity. Connect these choices to training efficiency and downstream performance, using concrete examples from models like BERT or GPT.

Pro tip: Emphasize that tokenization is not just a preprocessing step but a design decision that affects model capacity, generalization, and even fairness; mention how Cohere's models handle tokenization for multilingual and domain-specific use cases.

1. Define tokenization and its impact

Explain what tokenization is and why it's crucial: it determines the input representation, affecting vocabulary size, sequence length, and how words are split into subwords.

2. Discuss training trade-offs

Cover how tokenization choices affect training: larger vocabularies reduce sequence length but increase embedding size, while smaller vocabularies increase sequence length and computational cost.

3. Analyze downstream performance

Explain how tokenization impacts downstream tasks: subword tokenization helps with rare words and morphology, but overly granular splits can lose semantic meaning and hurt performance.

4. Provide examples and best practices

Give concrete examples (e.g., BPE vs WordPiece vs SentencePiece) and discuss when to use each, considering language, domain, and model architecture.

5. Conclude with practical implications

Summarize that tokenization is a trade-off between efficiency and expressiveness, and that the choice should align with the model's goals and data characteristics.

Key Points to Mention

  • Vocabulary size trade-off: larger vocab reduces sequence length but increases parameters and memory.
  • Subword tokenization (BPE, WordPiece, SentencePiece) handles rare words and morphology better than word-level tokenization.
  • Sequence length affects training time and the model's ability to capture long-range dependencies.
  • Tokenization impacts downstream tasks like NER, where subword splits can misalign with entity boundaries.
  • Multilingual and domain-specific tokenization require careful design to avoid bias and ensure coverage.
  • Tokenization choices can affect model fairness and robustness, e.g., by over-splitting certain dialects.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q3

Compare DPO, PPO, and GRPO for post-training alignment. When would you pick one over another?

Technical Trade-offsAlgorithms & Data Structures
Author's notes

This is the one that really separated people I think.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by defining each method's core mechanism and resource requirements, then compare them along axes like stability, sample efficiency, and implementation complexity. Finally, map each method to practical scenarios, emphasizing trade-offs and when each is preferable.

Pro tip: Mention that DPO is often preferred for its simplicity and lower compute, but PPO and GRPO can yield better performance when reward modeling is reliable and compute is available. Highlight that GRPO's group-based advantage estimation reduces variance without a value network, making it attractive for large-scale alignment.

1. Define the methods

Briefly explain DPO (direct preference optimization), PPO (proximal policy optimization), and GRPO (group relative policy optimization) in terms of their objectives and how they use preference data.

2. Compare key dimensions

Contrast them on sample efficiency, stability, compute cost, and implementation complexity. For example, DPO is simpler and more stable but may underperform; PPO is sample-efficient but unstable; GRPO reduces variance by comparing groups of responses.

3. Discuss trade-offs

Explain scenarios where each shines: DPO for limited compute or when simplicity is key; PPO when you have a good reward model and need high performance; GRPO for large-scale alignment where variance reduction is critical.

4. Provide selection criteria

Give a decision framework: consider available compute, data, reward model quality, and desired performance. For instance, start with DPO as a baseline, then try PPO or GRPO if more performance is needed and resources allow.

5. Conclude with practical recommendation

Summarize by stating that the choice depends on the specific constraints and goals, and mention that hybrid approaches or starting simple then scaling up is often wise.

Key Points to Mention

  • DPO eliminates the need for a separate reward model and policy sampling, making it simpler and more stable but potentially less optimal.
  • PPO requires a reward model and value function, offering strong performance but with high compute and tuning complexity.
  • GRPO uses group-based advantage estimation to reduce variance and eliminate the value network, improving stability and scalability.
  • Sample efficiency: PPO and GRPO can be more sample-efficient than DPO when online interaction is possible.
  • Compute and memory: DPO is cheapest, PPO is most expensive, GRPO is in between but scales well.
  • Practical selection: DPO for quick iterations or limited resources; PPO for maximum performance with ample compute; GRPO for large-scale alignment with many samples.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q4

What are the alignment trade-offs you're making when you apply RLHF, and how do you think about reward hacking?

Technical Trade-offsA/B Testing & Experimentation
Author's notes

Good conversation actually.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by framing RLHF as a multi-objective optimization problem where you balance helpfulness, harmlessness, and honesty, and acknowledge that trade-offs are inevitable. Then, discuss specific trade-offs like capability vs. safety and diversity vs. consistency, and explain how you measure and mitigate reward hacking through techniques like reward model ensembles and adversarial evaluation. Conclude with a practical example or lesson learned.

Pro tip: Emphasize that reward hacking is not just a technical bug but a fundamental challenge in specifying objectives; show you think about it proactively by designing reward models that are robust to distributional shift and by incorporating human oversight in the loop.

1. Define the alignment objectives

Briefly outline the core objectives of RLHF: helpfulness, harmlessness, and honesty, and note that these can conflict.

2. Identify key trade-offs

Discuss specific trade-offs such as capability vs. safety, diversity vs. consistency, and short-term vs. long-term alignment.

3. Explain reward hacking

Define reward hacking as the model exploiting flaws in the reward model to achieve high reward without fulfilling the intended goal.

4. Mitigation strategies

Describe techniques to mitigate reward hacking, such as reward model ensembles, adversarial training, and human evaluation.

5. Measurement and iteration

Explain how you measure trade-offs and reward hacking, and how you iterate to improve alignment.

Key Points to Mention

  • Trade-off between helpfulness and harmlessness: overly cautious models may refuse benign requests.
  • Reward hacking examples: model generating sycophantic or evasive responses to maximize reward.
  • Importance of diverse human feedback and red-teaming to identify reward hacking.
  • Use of reward model ensembles and uncertainty estimation to detect overoptimization.
  • Iterative process: continuous monitoring and updating of reward models and policies.
  • Real-world constraints: computational cost, latency, and scalability of RLHF.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q5

Explain how you'd set up distributed training across data parallelism, tensor parallelism, pipeline parallelism, and FSDP. What are the tradeoffs between these strategies?

System DesignTechnical Trade-offs
Author's notes

Long question, lots of ground to cover.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by defining each parallelism strategy and its primary purpose, then explain how to combine them hierarchically (e.g., tensor within a node, pipeline across nodes, data across replicas) with FSDP as a memory-efficient alternative. Conclude with tradeoffs in communication overhead, memory usage, scalability, and implementation complexity, and relate them to real-world scenarios like training large language models.

Pro tip: Emphasize that the optimal strategy depends on model size, hardware topology (intra-node vs. inter-node bandwidth), and batch size—and mention that FSDP often replaces data parallelism for large models by sharding optimizer states, gradients, and parameters. Also, note that combining strategies (e.g., tensor + pipeline + data) is common in practice, but each added dimension increases communication overhead and debugging complexity.

1. Define each parallelism strategy

Briefly explain data parallelism (replicating the model and splitting the batch), tensor parallelism (splitting individual layers/operations across devices), pipeline parallelism (splitting the model into stages across devices), and FSDP (sharding model parameters, gradients, and optimizer states across data-parallel workers).

2. Explain setup and combination

Describe how to set up each strategy in practice: data parallelism with DistributedDataParallel, tensor parallelism with Megatron-LM or similar, pipeline parallelism with tools like PipeDream or PyTorch's pipeline API, and FSDP with PyTorch's FSDP wrapper. Then discuss how to combine them hierarchically (e.g., tensor parallelism within a node, pipeline across nodes, data parallelism across replicas).

3. Analyze tradeoffs

Compare the strategies on communication overhead (all-reduce vs. all-gather vs. point-to-point), memory efficiency, scalability limits, and ease of implementation. Highlight that tensor parallelism has high communication per layer, pipeline parallelism suffers from bubble overhead, data parallelism requires large global batch sizes, and FSDP reduces memory at the cost of extra communication.

4. Recommend based on constraints

Provide guidance on choosing a strategy based on model size, cluster topology (intra-node NVLink vs. inter-node InfiniBand), and batch size. For example, use FSDP for models that fit within a node but are too large for data parallelism, and combine tensor + pipeline + data for trillion-parameter models.

Key Points to Mention

  • Communication patterns: all-reduce in data parallelism, all-gather/reduce-scatter in FSDP, all-reduce/all-gather in tensor parallelism, point-to-point in pipeline parallelism.
  • Memory footprint: data parallelism replicates full model states, tensor parallelism splits activations and parameters, pipeline parallelism splits layers, FSDP shards everything.
  • Scalability: data parallelism scales with batch size, tensor parallelism limited by intra-node bandwidth, pipeline parallelism limited by number of stages and bubble size, FSDP scales with number of GPUs.
  • Implementation complexity: data parallelism is simplest, tensor and pipeline parallelism require model rewriting, FSDP is a drop-in replacement for DDP with sharding.
  • Hybrid approaches: 3D parallelism (data + tensor + pipeline) used in Megatron-Turing NLG and GPT-3; FSDP can be combined with tensor and pipeline parallelism.
  • Hardware considerations: NVLink for tensor parallelism, InfiniBand for pipeline and data parallelism; FSDP benefits from high-bandwidth interconnects.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q6

How do AdamW and Lion differ, and when might you prefer one over the other for LLM training?

Technical Trade-offsAlgorithms & Data Structures
Author's notes

Shorter exchange.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by defining the core algorithmic differences between AdamW and Lion, focusing on how they handle weight decay and update rules. Then discuss practical trade-offs in LLM training, such as memory, compute, hyperparameter sensitivity, and empirical performance. Conclude with when to prefer one over the other based on model size, resource constraints, and training stability.

Pro tip: Mention that Lion often requires a smaller learning rate and weight decay than AdamW, and that its benefits are more pronounced in large-scale training where memory and compute savings matter. Also, note that AdamW remains a robust default due to its extensive tuning and proven track record.

1. Explain AdamW

Describe AdamW as a variant of Adam with decoupled weight decay, which improves regularization by applying weight decay directly to the weights rather than through the gradient. Highlight its adaptive learning rates and momentum for each parameter.

2. Explain Lion

Introduce Lion as a newer optimizer that uses sign-based updates and a single momentum term, discovered via program search. Emphasize that it only tracks momentum, not second moments, reducing memory and compute.

3. Compare key differences

Contrast the algorithms: AdamW maintains first and second moments and uses adaptive updates; Lion uses sign operations and a single momentum. Discuss implications: Lion has lower memory footprint and potentially faster training, but may be more sensitive to hyperparameters.

4. Discuss trade-offs in LLM training

Cover practical considerations: AdamW is well-tested, stable, and often the default; Lion can save memory and compute, but may require more tuning and can be less stable. Mention that Lion's benefits grow with model size and batch size.

5. Provide preference scenarios

Give guidance: prefer AdamW for smaller models, limited tuning budget, or when stability is critical; prefer Lion for large-scale training with abundant resources for hyperparameter search, or when memory/compute efficiency is paramount.

Key Points to Mention

  • AdamW decouples weight decay from gradient updates, while Lion uses sign-based updates with a single momentum.
  • Lion has lower memory overhead (only momentum) and may reduce compute due to simpler updates.
  • Lion often requires smaller learning rates and weight decay than AdamW, and may need more hyperparameter tuning.
  • AdamW is a robust default with extensive empirical validation, especially for smaller models and fine-tuning.
  • Lion can outperform AdamW in large-scale LLM training, but results can vary; it's not universally better.
  • Considerations include model size, batch size, available compute, and tolerance for hyperparameter search.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q7

How do you design evaluations that are reliable and not contaminated, especially for capability vs alignment distinctions?

A/B Testing & ExperimentationProduct Analytics & Metrics
Author's notes

Probably my weakest area.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by defining what you mean by capability and alignment evaluations, emphasizing that capability measures what a model can do while alignment measures whether it does so safely and as intended. Then describe a systematic process to ensure reliability (e.g., test-retest, inter-rater agreement) and avoid contamination (e.g., held-out sets, adversarial filtering). Finally, discuss how to design separate but complementary evaluations for capability and alignment, using metrics and controls tailored to each.

Pro tip: Highlight the importance of pre-registering evaluation protocols and using blinded human evaluations to reduce bias, and mention that you regularly audit for contamination by checking for overlap between training and evaluation data using techniques like n-gram overlap or embedding similarity.

1. Clarify Definitions and Objectives

Clearly distinguish between capability (e.g., accuracy, fluency) and alignment (e.g., harmlessness, honesty) and define the specific goals of each evaluation. This ensures the evaluation design targets the right constructs.

2. Design for Reliability

Implement measures such as multiple annotators with clear guidelines, calculate inter-rater reliability (e.g., Cohen's kappa), and conduct test-retest checks. Use standardized prompts and controlled conditions to minimize variance.

3. Prevent Contamination

Ensure evaluation data is strictly held out and not used in training. Use decontamination techniques like n-gram overlap detection, embedding similarity, and canary strings. Regularly audit for leakage.

4. Separate Capability and Alignment Evaluations

Design distinct test suites: capability tests focus on task performance (e.g., reasoning, coding), while alignment tests focus on safety, bias, and adherence to instructions. Use different metrics and human evaluation protocols for each.

5. Validate and Iterate

Pilot the evaluations, analyze results for reliability and validity, and refine as needed. Use A/B testing to compare model versions and ensure evaluations are sensitive to meaningful changes.

Key Points to Mention

  • Definition of capability vs alignment and why they require different evaluation approaches
  • Reliability metrics: inter-rater agreement, test-retest reliability, and confidence intervals
  • Contamination prevention: held-out data, decontamination techniques, and regular audits
  • Use of human evaluation with clear rubrics and blinding to reduce bias
  • Adversarial and red-teaming evaluations for alignment
  • A/B testing frameworks to compare model versions on both capability and alignment metrics

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.