← StackAdapt Interview Insights

StackAdapt·Software Engineer·Technical Phone Screen·Intermediate

Intermediate
Apr 2026

Summary

Stackadapt software engineer interview focused on a pretty involved data structure problem with strict complexity requirements. The follow-up questions about Java internals caught me more off guard than the main problem itself.

Questions Asked (3)

Q1

Design a windowed key-value store where entries expire after a time window W. Implement Put(key, value, timestamp), Get(key, timestamp), and GetAverage(timestamp), with Put and Get guaranteed worst-case O(1), not amortized. ArrayDeque-based solutions are explicitly not accepted.

Algorithms & Data StructuresTechnical Trade-offsSystem Design
Author's notes

The 'worst-case O(1), not amortized' constraint is the whole puzzle here.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Clarify that the store must support O(1) worst-case Put and Get, and that GetAverage must be efficient. Propose a design using a hash map for key-value storage and a bucketed time wheel (circular array of deques) for expiration, ensuring O(1) operations by avoiding amortized structures like ArrayDeque. Discuss trade-offs and handle edge cases like timestamp ordering and average computation.

Pro tip: Emphasize that worst-case O(1) means no amortization, so avoid dynamic resizing or linked list traversals; use fixed-size buckets and direct indexing. Also, mention that GetAverage can be O(1) by maintaining a running sum and count of active entries.

1. Clarify requirements and constraints

Confirm that Put and Get must be worst-case O(1), not amortized, and that GetAverage should be efficient. Ask about timestamp granularity, whether timestamps are monotonic, and if W is fixed.

2. Design core data structures

Use a hash map for key-value storage, and a circular array of buckets (time wheel) where each bucket covers a time unit. Each bucket contains a set of keys expiring at that time, allowing O(1) insertion and removal.

3. Implement Put and Get with O(1) worst-case

For Put, compute the expiration bucket index and add the key to that bucket's set; update the hash map. For Get, check if the key exists and if its timestamp is within the window; if expired, remove it lazily or eagerly.

4. Implement GetAverage efficiently

Maintain a running sum and count of active values. On Put, add to sum and increment count; on expiration, subtract and decrement. GetAverage returns sum/count in O(1).

5. Discuss trade-offs and edge cases

Address memory usage, handling out-of-order timestamps, and potential collisions. Compare with alternative approaches like balanced BSTs or heaps, explaining why they don't meet O(1) worst-case.

Key Points to Mention

  • Use of a hash map for O(1) key lookup and a time wheel (circular array of buckets) for O(1) expiration management.
  • Avoid ArrayDeque and other amortized structures; use fixed-size arrays or linked lists with O(1) insert/delete.
  • Maintain a running sum and count for GetAverage to achieve O(1) time.
  • Handle expiration lazily or eagerly, ensuring that expired entries are not counted in GetAverage.
  • Consider timestamp granularity and window size to determine bucket count; if W is large, use a hierarchical time wheel.
  • Discuss worst-case scenarios: hash collisions (use perfect hashing or open addressing with O(1) worst-case) and bucket overflow (use linked lists with O(1) operations).

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q2

How do you handle hash collisions in your implementation, when do collisions actually occur, and what is the time complexity when collisions happen?

Algorithms & Data StructuresTechnical Trade-offs
Author's notes

Blanked for a second.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by defining what a hash collision is and when it occurs, then explain the common resolution techniques (separate chaining and open addressing) and their trade-offs. Finally, discuss the time complexity implications, emphasizing that while average case remains O(1), worst-case can degrade to O(n) or O(log n) depending on the implementation and collision handling.

Pro tip: Mention that in practice, modern hash table implementations (like Java's HashMap) use a combination of chaining and balanced trees (e.g., red-black trees) to mitigate worst-case scenarios, and that good hash functions and load factor management are crucial to minimize collisions.

1. Define hash collisions and when they occur

Explain that a collision happens when two different keys hash to the same index in the hash table. This occurs due to the finite size of the table and the infinite number of possible keys, or due to a poor hash function that distributes keys unevenly.

2. Describe collision resolution techniques

Discuss separate chaining (each bucket holds a linked list or tree of entries) and open addressing (probing for the next available slot). Mention variations like linear probing, quadratic probing, and double hashing.

3. Explain time complexity under collisions

State that with separate chaining, average time for search/insert/delete is O(1 + α) where α is the load factor, but worst-case is O(n) if all keys collide. With open addressing, average is O(1/(1-α)) and worst-case O(n). Mention that Java 8+ uses a balanced tree for long chains, reducing worst-case to O(log n).

4. Discuss trade-offs and practical considerations

Compare chaining vs open addressing: chaining is simpler and handles high load factors better, while open addressing has better cache performance but requires careful load factor management. Mention that dynamic resizing (rehashing) helps keep load factor low.

5. Conclude with best practices

Summarize that a good hash function, appropriate initial capacity, and load factor tuning are key to minimizing collisions and maintaining O(1) average performance.

Key Points to Mention

  • Definition of hash collision and causes (finite table size, poor hash function).
  • Separate chaining: linked lists or balanced trees per bucket.
  • Open addressing: linear/quadratic probing, double hashing.
  • Time complexity: average O(1), worst-case O(n) or O(log n) with treeification.
  • Load factor and dynamic resizing (rehashing) to maintain performance.
  • Real-world implementations: Java HashMap, Python dict, C++ unordered_map.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q3

How does Java's HashMap handle rebalancing when collisions become frequent?

Algorithms & Data StructuresTechnical Trade-offs
Author's notes

They asked this as a follow-up and I was a bit shaky.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by explaining the basic structure of HashMap (array of buckets with linked lists) and how collisions are handled via chaining. Then describe the treeification process: when a bucket's linked list exceeds a threshold (TREEIFY_THRESHOLD = 8) and the table capacity is at least 64, the list is converted to a Red-Black tree to improve worst-case performance from O(n) to O(log n). Finally, mention that rebalancing also occurs during resizing when the load factor exceeds 0.75, which redistributes entries and may untreeify if the bucket size drops below UNTREEIFY_THRESHOLD = 6.

Pro tip: Emphasize that treeification is a trade-off: it adds overhead for small buckets but prevents performance degradation under heavy collisions, and it only happens when capacity is sufficient to avoid unnecessary conversions. Also note that this optimization was introduced in Java 8 to mitigate hash collision attacks.

1. Explain collision handling

Describe how HashMap uses separate chaining with linked lists to handle collisions, and note that this can lead to O(n) lookup in worst case.

2. Introduce treeification

Explain that when a bucket's list exceeds TREEIFY_THRESHOLD (8) and table capacity >= MIN_TREEIFY_CAPACITY (64), the list is converted to a Red-Black tree, improving worst-case to O(log n).

3. Discuss rebalancing during resize

Mention that when the load factor exceeds 0.75, the table is resized (doubled), and entries are redistributed; this can also trigger treeification or untreeification.

4. Cover untreeification

Explain that if a tree bucket shrinks below UNTREEIFY_THRESHOLD (6) due to removals or resizing, it reverts to a linked list to save space and reduce overhead.

5. Summarize trade-offs

Conclude by highlighting the performance trade-offs: treeification adds complexity but protects against hash collisions and denial-of-service attacks, while resizing balances time and space.

Key Points to Mention

  • Separate chaining with linked lists for collision resolution
  • TREEIFY_THRESHOLD = 8 and UNTREEIFY_THRESHOLD = 6
  • MIN_TREEIFY_CAPACITY = 64: treeification only if capacity is at least 64
  • Red-Black tree implementation for buckets, providing O(log n) worst-case operations
  • Load factor (default 0.75) triggers resizing (doubling) and rehashing
  • Treeification introduced in Java 8 to mitigate hash collision attacks and improve performance

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.