← Amazon Interview InsightsMachine Learning Engineer

Amazon·Machine Learning Engineer·Technical Phone Screen·Senior

Senior
Jun 2026

Summary

Amazon ML engineer interview that was basically a four-part Morse code problem, each part building on the last. By the end I was writing backtracking code and genuinely unsure if I was still in a coding interview or some kind of puzzle competition.

Questions Asked (4)

Q1

Write a function that encodes a plain text string into Morse code, using separators between characters and words.

Algorithms & Data Structures
Author's notes

This part was fine.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Clarify the exact encoding requirements, including the Morse code mapping, character separator (e.g., space), and word separator (e.g., three spaces). Then outline a solution that iterates through the input string, looks up each character in a predefined dictionary, and builds the encoded string with appropriate separators. Discuss edge cases and potential optimizations.

Pro tip: Mention that you would handle unsupported characters gracefully, either by skipping them or raising an error, and discuss how to extend the solution to support lowercase letters and punctuation. This shows attention to detail and production-readiness.

1. Clarify requirements and assumptions

Ask about the expected input format (e.g., uppercase only, spaces between words) and the exact separators to use. Confirm whether unsupported characters should be ignored or cause an error.

2. Define the Morse code mapping

Create a dictionary mapping each supported character (A-Z, 0-9, punctuation) to its Morse code representation. Mention that this can be a constant lookup table.

3. Design the encoding algorithm

Iterate through each character in the input string. For each character, look up its Morse code and append it to the result, adding a single space after each character and three spaces after each word (or handle spaces in the input as word separators).

4. Handle edge cases and errors

Discuss how to handle empty strings, leading/trailing spaces, and unsupported characters. Decide whether to skip, replace, or throw an error for unsupported characters.

5. Analyze complexity and test

State that the time complexity is O(n) where n is the length of the input string, and space complexity is O(n) for the output. Walk through a few test cases to verify correctness.

Key Points to Mention

  • Use a dictionary for O(1) character lookup.
  • Separate characters with a single space and words with three spaces (or as specified).
  • Handle uppercase conversion if the input may be lowercase.
  • Consider unsupported characters: skip, replace, or error.
  • Time and space complexity: O(n) time, O(n) space.
  • Test with edge cases: empty string, single word, multiple words, punctuation.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q2

Now decode a Morse code string that has separators back into readable text.

Algorithms & Data Structures
Author's notes

Straightforward reverse of part one.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Clarify the exact encoding format (e.g., spaces between letters, slashes between words) and then design a straightforward parsing algorithm using a hash map for Morse-to-character lookup. Walk through edge cases like empty input, invalid codes, and multiple spaces, and discuss time/space complexity.

Pro tip: Mention that Morse code is prefix-free, so a greedy left-to-right decode is unambiguous; this shows you understand the encoding's properties and can justify why a simple split-and-map approach is correct.

1. Clarify the input format

Ask the interviewer to confirm the separators: typically a single space between Morse letters and a slash (or three spaces) between words. Also confirm the expected output format (e.g., uppercase letters, spaces between words).

2. Build a decoding map

Create a hash map (dictionary) from Morse code strings to English characters, including letters, digits, and common punctuation. This allows O(1) lookup per token.

3. Parse and decode

Split the input string by the word separator first, then split each word by the letter separator. For each token, look up its value in the map and concatenate the results, inserting spaces between decoded words.

4. Handle edge cases

Consider empty input, leading/trailing separators, multiple consecutive separators, and invalid Morse tokens. Decide whether to ignore, raise an error, or return a placeholder.

5. Analyze complexity and test

State that time complexity is O(n) where n is the number of characters in the input, and space is O(m) for the map plus output. Walk through a small example to verify correctness.

Key Points to Mention

  • Use a hash map for O(1) Morse-to-character lookups.
  • Clarify separator conventions: space between letters, slash between words.
  • Handle edge cases: empty string, extra spaces, invalid Morse codes.
  • Time complexity O(n) and space complexity O(1) for the map (fixed size).
  • Morse code is prefix-free, so greedy decoding is unambiguous.
  • Consider using a trie if the input is a continuous bitstream without separators (but not needed here).

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q3

Decode a Morse string with no separators at all, given that the input is guaranteed to be a single word from a known vocabulary.

Algorithms & Data StructuresTechnical Trade-offs
Author's notes

This is where it got interesting.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Treat this as a constrained decoding problem where the vocabulary provides the search space. Use dynamic programming to segment the Morse string into valid Morse code sequences that map to words in the vocabulary, leveraging the known word list to prune the search. Discuss trade-offs between DP, backtracking, and trie-based approaches, and consider the role of language models for ambiguity resolution.

Pro tip: Emphasize that the vocabulary constraint transforms an exponential problem into a tractable one, and mention that in real-world ML systems, you'd often combine algorithmic decoding with a probabilistic language model to handle noise and ambiguity.

1. Clarify the problem and constraints

Confirm that the input is a single word from a known vocabulary, with no separators, and that Morse code mappings are standard. Discuss potential ambiguities (e.g., multiple valid decodings) and how to handle them.

2. Choose a decoding strategy

Propose using dynamic programming (DP) where dp[i] represents whether the prefix of length i can be segmented into valid Morse codes that form a vocabulary word. Alternatively, use a trie of Morse codes for efficient lookup.

3. Design the DP recurrence

For each position i, try all possible Morse code lengths (1-4) and check if the substring maps to a letter. If so, and if the resulting letter sequence is a prefix of some vocabulary word, continue. Use a set or trie to check vocabulary membership.

4. Optimize and handle multiple solutions

If multiple decodings exist, discuss how to rank them (e.g., using a language model or frequency). Optimize by precomputing Morse-to-letter mappings and using memoization to avoid redundant computations.

5. Analyze complexity and trade-offs

Analyze time and space complexity: O(n * L * V) where n is length, L is max Morse code length, and V is vocabulary size (or O(n * L) with a trie). Discuss trade-offs between DP, backtracking, and trie-based approaches.

Key Points to Mention

  • Dynamic programming for segmentation with vocabulary constraint
  • Trie data structure for efficient prefix matching of Morse codes
  • Handling ambiguity: multiple valid decodings and ranking strategies
  • Time and space complexity analysis (e.g., O(n * L * V) vs. O(n * L))
  • Trade-offs between DP, backtracking, and trie-based approaches
  • Integration with language models for probabilistic decoding in ML systems

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.

Q4

Extend the decoder to handle a separator-free Morse string that could represent multiple words from the vocabulary, using backtracking to find all valid decodings.

Algorithms & Data StructuresTechnical Trade-offs
Author's notes

Okay this one hurt a little.

Create a free account to read the full note

AI HintsAI Generated

Suggested Approach

Start by clarifying the problem: given a separator-free Morse string and a vocabulary of words with their Morse codes, find all valid decodings. Then describe a backtracking algorithm that recursively tries to match prefixes of the remaining Morse string to vocabulary words, building up the decoded sentence. Discuss complexity and potential optimizations like memoization or trie-based pruning.

Pro tip: Mention that you would use a trie of Morse codes to efficiently find all vocabulary words that are prefixes of the remaining string, which prunes the search space significantly. Also, highlight that memoization on the remaining Morse string can avoid redundant computations when multiple paths lead to the same suffix.

1. Clarify the problem and constraints

Confirm that the input is a continuous Morse string without separators, and the output should be all possible sequences of vocabulary words that concatenate to the input. Ask about vocabulary size, maximum word length, and whether Morse codes are prefix-free (they are not).

2. Outline the backtracking approach

Explain that you will recursively try to match each vocabulary word's Morse code as a prefix of the remaining string. If it matches, add the word to the current path and recurse on the remainder; if the remainder is empty, record the path as a valid decoding.

3. Optimize with a trie and memoization

Build a trie of Morse codes for O(L) prefix matching, where L is the maximum word length. Use memoization (e.g., a hash map from remaining Morse string to list of decodings) to avoid recomputing the same suffix multiple times.

4. Analyze complexity and trade-offs

Discuss time complexity: worst-case exponential without memoization, but with memoization it becomes O(N * W) where N is the length of the Morse string and W is the number of vocabulary words, though output size can be exponential. Mention space complexity for the trie and memo table.

5. Handle edge cases and test

Consider empty input, no valid decodings, and ambiguous cases. Walk through a small example to demonstrate correctness, and suggest unit tests for these scenarios.

Key Points to Mention

  • Backtracking with recursion to explore all possible word segmentations.
  • Using a trie for efficient prefix matching of Morse codes.
  • Memoization to avoid redundant computations on overlapping subproblems.
  • Complexity analysis: exponential worst-case but optimized with memoization.
  • Handling of ambiguous decodings and outputting all valid sentences.
  • Potential for dynamic programming as an alternative to backtracking.

AI-generated suggestions, not part of the candidate's original notes. May be inaccurate — verify before relying on them.